Pulsed Power Japan Laboratory Ltd.
1
Diameter 30cm
Height 35cm
Weight 23kg
Modules 30
MOSDETs 720
Use Plasma generation
NoProduct nameSpecificationPDF Data DownLoad
5
Output Voltage 60kV
Output Current 60Ap
Pulse Width 80ns
Rise Time 25ns
Burst Frequency 50kHz
Burst Pulse 50shots/burst
Burst Repetition 20Hz
6
Output voltage ± 6 kVp
Output current ± 60 A p
Pulsed waveform sinusoidal
Repeat 2 MHz
10
Output Voltage -37kVp
Output Current 88Ap
Pulse Width 4.5μs
Repetition 200Hz
11
Output Voltage -40kVp
Output Current 40Ap
Pulse Width 4.5μs
Repetition 250Hz
Higher power is available by parallel operation.
12
Output Voltage -30kVp
Output Current 30Ap
Pulse Width 50ns
Rise Time 20ns
Repetition 1kHz
Input DC24V, 10A
Weight 16.5kg
13
Output Voltage(for ignition) -20kVp
Output Voltage(for keeping) -1kV
Output Current 1Ap
Pulse Width(for ignition) 100ns
Pulse Width(for keeping) 10μs~1ms
Repetition 100Hz~10kHz（duty<10%）
15
Output Voltage 300Vp
Output Current 400Ap
Pulse Width 1ms
Repetition 50Hz
17
Output Voltage ±6kVp
Output Current ±60Ap
Frequency 2MHz
Duty(Max.) 5%
Burst width(Max.) 100μs
18
Output Voltage ±５００V
Output Current ±４００A
Frequency ３MHｚ
Duty(Max.) ５％
| Circuit type | |
|---|
Please do not hesitate to consult us about prototyping prototypes related to generation and control of pulse power, technical support, joint research, etc.
Information on Technical Support / Collaborative Research
Information on Technical Assistance
We are doing all technical support on Pulsed Power generation and control.
We provide the following technical services according to each stage of research plan.
- Conceptual design of power supply system
- Basic design of High Voltage Power Supply
- Detailed design of high voltage power supply
- Experimental prototype of high voltage power supply, evaluation test
- Miniaturized design optimized for structural combination with load
- Malfunction survey, measures (malfunction, noise, breakdown etc.)
- Performance improvement
- Experiment, data measurement
- Analysis, simulation (circuit calculation, intensity calculation, electromagnetic field calculation, heat conduction calculation, etc.)
- Other
Information on Joint Research
We will respond to collaborative research on Pulsed Power generation and control.
We will respond to the following joint research corresponding to each stage of the research plan.
- Development of power supply system
- Optimum structural design suitable for load
- Performance improvement
- Student guidance (electric circuit, electronic circuit, electromagnetism, CAD, circuit simulation,Experiments on electricity, electronics and high pressure etc)
- Part time lecturer (mentoring, guidance of graduation thesis and graduate research)
- Other
Contact UsInquiries by e-mail are accepted 24 hours. For inquiries you received outside the reception hours, we will correspond after the next business day.